Jekit Aluminum 6061 Car Brake Parts Center Hub Bracket Color Customized​

Product parameter

Introduction

6061 is a heat-treatable-strengthened alloy with good formability, weldability, machinability, and at the same time moderate strength, which can maintain good operability after annealing.
The main alloying elements of 6061 alloy are magnesium and silicon, and form the Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is still a small amount of conductive material. copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function.
6061-T651 is the main alloy of 6061 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics and have processability. Excellent, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.
Typical use
The application of strips is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons and other industries.
Aerospace aluminum is used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, siding and landing gear struts, as well as rocket forging rings, spacecraft siding, etc.
Aluminum for transportation is used for car body structural parts of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automobile engine parts, air conditioners, radiators, body panels, wheel hubs and ships.
Aluminum material for packaging All-aluminum pop-top can materials are mainly used as metal packaging materials in the form of sheets and foils, which are made into cans, lids, bottles, barrels and packaging foils. Widely used in beverages, food, cosmetics, medicines, cigarettes, industrial products and other packaging.
Aluminum for printing is mainly used to make PS plate. Aluminum-based PS plate is a new type of material in the printing industry, which is used for automatic plate making and printing.
Aluminum alloys for architectural decoration are widely used in building frames, doors and windows, ceilings, decorative surfaces, etc. because of their good corrosion resistance, sufficient strength, excellent process performance and welding performance. Such as various building doors and windows, aluminum profiles for curtain walls, aluminum curtain wall panels, profiled panels, checkered panels, color-coated aluminum panels, etc.
Aluminum for electronic appliances is mainly used in various busbars, wires, conductors, electrical components, refrigerators, air conditioners, cables and other fields. Specifications: round bar, square bar
Representative uses include aerospace fixtures, electrical fixtures, communications, and are also widely used in automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carriers, etc.
Chemical composition range
0.4～0.8Si, 0.70Femax, 0.15～0.40Cu, 0.15Mnmax, 0.80～1.20Mg, 0.04～0.35Cr, 0.25Znmax, 0.15Timax, the maximum content of each other component is 0.05, the maximum total content of other components is 0.15, and the balance is Al.

Reference picture

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.